丁基防水嵌缝胶不可与下次配制的胶混合在一起用

发布时间 : 2024-11-1 9:54:19
Views:

(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.

丁基防水嵌缝胶不可与下次配制的胶混合在一起用

(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.

发布时间 : 2024-11-1 9:54:19
Views:

根据缝隙大小锯切聚苯乙烯泡沫填人接缝孔内，外露3cm左右的余量。将XM-43防水丁基防水嵌缝胶分割成小块，用手拉成长条状，然后在塑料平板上搓成与缝隙大小相当的胶条，并用手将胶条向缝内挤压。使胶充满缝内并与复合板、铝合金窗及聚苯乙烯泡沫枯牢，最后用整形工具或刮刀刮平表面.外露5-8 mm左右的余量。XilI-38丁基防水嵌缝胶由}M一38密封剂基胶和38号硫化膏两个组分组成，其比例〔重量比)为XM一38密封剂基胶、38号硫化膏100;混合工艺;按比例在塑料盘(盆)中用开刀将两组分混合搅拌均匀，至丁基防水嵌缝胶呈现一个颜色为止。I4-38丁基防水嵌缝胶一般采用刮涂或用手动注胶枪灌注，然后用整形工具修整成月牙形。

注意事项

防水丁基防水嵌缝胶应在塑料制品中存放及拌合。Ch-38丁基防水嵌缝胶的活性期一般为2一要求随拌随用。丁基防水嵌缝胶表面应光滑平整，缝子深浅一致，目视无明显的接搓。在完成上述工艺后应及时用棉丝擦去多余的丁基防水嵌缝胶。多余的丁基防水嵌缝胶比较厚时，可以先用刮刀铲除，再用棉丝蔡拭。建议在非密封饰面上贴纸胶条，待丁基防水嵌缝胶的可剥落期过后赊去隔离带。本次使用的丁基防水嵌缝胶不可与下次配制的丁基防水嵌缝胶混合在一起，以免影响密封质量。http://www.sdyuantai.com/

Scan the QR code to read on your phone

上一篇: 选用合适的外窗MS密封胶

下一篇: 硅烷改性聚氨酯密封胶的主要性质

上一篇: 选用合适的外窗MS密封胶

下一篇: 硅烷改性聚氨酯密封胶的主要性质